Features
The
RampMaster II Series puts consistent, automatic firing at your fingertips!
Well engineered
element and fire brick placement offer unparalleled heat distribution
qualities.
All RampMaster II models are equipped with the digital RampMaster II Automatic Controller. Firing commands are programmed into the controller with an easy-to-use keypad - firing the kiln with consistent and accurate results.
You can even program the RampMaster II Controller using your home computer and KISS software and Kiln Kits.
All RampMaster II kilns can be equipped with ORTON Downdraft Venting systems. This excellent vent system removes all the "nastiness" that may be created during firing while providing a fresh source of air. Factory installation is an option when ordering.
|
RampMaster II® 1413 Specially for dollmakers - Cone 10 | |||
| Firing Chamber (diameter x height) = 14.5" x 13.5" | ||||
| Specifications and other information about RM2 1413 | ||||
| Stainless steel |
|
 |
||
| Additional 3" Fire Brick | optional | |||
| Furniture Kit available at time of kiln purchase only | ||||
| Orton Downdraft Vent System optional | ||||
 |
RampMaster II® 1822 - Cone 10 | ||
Firing
Chamber (diameter x height) = 17.5" x 22.25" |
|||
| Specifications and other information about the RM2 1822 | |||
| Stainless Steel or Deluxe |
|
||
| Furniture
Kit
available
only at time of Kiln purchase only
|
|||
| Orton Downdraft Vent System optional | |||
 |
RampMaster II® 2322 - Cone 10 | ||
| Firing Chamber (diameter x height) = 23.5" x 22.25" | |||
| Specifications and other information about the RM2 2322 | |||
| Stainless Steel or Deluxe |
|
||
*
3 Phase 240V & 208V models additional $67 |
|||
| Furniture Kit available only at time of Kiln purchase only | |||
| Orton Downdraft Vent System optional | |||
 |
RampMaster II® 2329 - Cone 10 | ||
| Firing Chamber (diameter x height) = 23.5" x 29" | |||
| Specifications and other information about the RM2 2329 | |||
| Stainless Steel or Deluxe |
|
||
*
3 Phase 240V & 208V models additional $$ |
|||
| Furniture Kit available only at time of Kiln purchase only | |||
| Orton Downdraft Vent System optional | |||
 |
RampMaster II® 2929 - Cone 10 | ||
| Firing Chamber (diameter x height) = 29" x 29" | |||
| Specifications and other information about the RM2 2929 | |||
| Stainless Steel or Deluxe | |
||
*
3 Phase 240V & 208V models additional $$ |
|||
| Furniture Kit available only at time of Kiln purchase only | |||
| Orton Downdraft Vent System optional | |||
  |
|||
