Kiss Software
Mini World Home PageClassic Manual KilnsRAmpmaster II Automatic KilnsTnB & Fyrematic dual control kilnsKiln AccessoriesOrton Venting SystemsEvenheat Kiln FeaturesWhat's Best for YouPyrometric conesEvenheat ManualsLots of Kiln & Troubleshooting Information - troubleshooting, etcHelpful Tips on FiringLots of Good Stuff & LinksHow to Shop Online
Kiss Logo
Control and monitor your RampMaster II Kiln with your personal computer!

Evenheat Kiln offers KISS, a full featured computer program that allows you to program, monitor, collect firing data and start/stop your kiln using your personal computer.
KISS (kiln interface software system) can control and monitor up to 10 kilns equipped with the RampMaster 2 controller using the Kiss Kiln Kit.
Installation is simple: connect the harness to the RampMaster 2 control board and any available PC COM port, install the software and you're ready to go.
Kiss Starter Kit
Kiss Starter Kit   Contact Us to Order
The KISS Starter Kit includes all the hardware and software needed for success. Installation is very easy.
Please note the KISS Starter Kit (SM-1) is designed to connect the first, initial kiln to your personal computer. In order to connect additional kilns, up to 9 more, the KISS Kiln Kit (KM-1) is necessary.
Kiss Starter Kit
Kiss Kiln Kit   Contact Us to Order
KISS can control up to 10 kilns. Simply link your additional kilns together using the KISS Kiln Kit and you're ready to go. No software needed, just connect and go.
Please note that this KISS Kiln Kit (KM-1) is designed for kilns that are added to your existing KISS system. The first kiln in your system must be connected using the KISS Starter Kit (SM-1). Additional kilns need only the KISS Kiln Kit (KM-1) for connection.

Kiss Software Features
Main Window Screen Main Window
Displays the status of all connected kilns. Just click on a kiln to check its status.
Kiln Status Screen Kiln Status Window
Displays and controls all sorts of "need to know stuff" like current temperatures, status of firing, current set point and segment, current program, hold times, etc. Definitely the most used screen of the KISS program.
Programming Screen Programming Window
Develop your personal firing profiles in the Programming Window or choose among a list of pre-set programs.

PC System Requirements:
Windows 95, 98, NT, 3.51 or later
VGA or High Resolution
4MB of RAM
5MB of Disk Space

Equipment Requirements:
The KISS software\hardware packages are designed
for exclusive use with kilns fitted with the
Evenheat RampMaster II¨ Automatic Temperature Controllers. 

For more, detailed info on the KISS Starter Kit or KISS Kiln Kit packages
e-mail kiss@evenheat-kiln.com